Bit chuyên nghiệp 70mm Wiha 32806
Packaging Plastic box, reusable and dust repellent. Extra Easily identifiable content with large symbols. The TORX® ball end enables fastening and unfastening at an angle of up to 25°. With elongated TORX® profile behind ball end.
Bit chuyên nghiệp 50mm Wiha 32805
Packaging Plastic box, reusable and dust repellent. Extra Easily identifiable content with large symbols. The TORX® ball end enables fastening and unfastening at an angle of up to 25°. With elongated TORX® profile behind ball end.
Tuốc nơ vít tác động tay Wiha 32556
Material High-quality chrome-molybdenum steel, through-hardened, with hand protection. Drive Square 1/2". Application For loosening jammed screws or nuts together with the Wiha 5/16" impact bits and holder. Maximum transmissible torque of up to 200 Nm. Extra The insert is...
kẹp giữ bit hạng nặng với bóng Wiha 32547
Material High-quality chrome-molybdenum steel, through-hardened, chrome-plated and polished. Drive DIN 3120. Application For use of C 8 bits. Required for use with hand impact screwdriver, series 24636.
Bit giữ từ tính Wiha 32505
Suitable for For bits according to DIN 3126, ISO 1173 style C 4. Drive DIN 3126, ISO 1173, style E 6.3. Application Suitable for 4 mm bits, e.g. Wiha 7000-7005 series. Extra With magnet.
Bit chuyên nghiệp Wiha 32494
Material High grade chrome-vanadium steel, through hardened. Drive DIN 3126, ISO 1173, style E 6.3. Application For fastening and unfastening positive/ negative screws in switchboard systems, fuse boxes, terminal blocks and relays.
Bit chuyên nghiệp Wiha 32490
Material High grade chrome-vanadium steel, through hardened. Drive DIN 3126, ISO 1173, style E 6.3. Application For fastening and unfastening positive/ negative screws in switchboard systems, fuse boxes, terminal blocks and relays.
Bit chuyên nghiệp 70mm Wiha 32409
Material High grade chrome-vanadium steel, through hardened. Drive DIN 3126, ISO 1173, style E 6.3. Application For all internal TORX® screws, especially in hard-to-reach places. Extra The TORX® ball end enables fastening and unfastening at an angle of up to 25°. With...
Nhíp ESD 32344
Standards IEC 61340-5-1. Tip form Curved at a 35° angle with an approx. 2 mm wide tip, formed gripping end for 0.8 mm dia. Design Smooth gripping surface, grooved gripping surface. Non-glare black coated, anti-static. Anti-magnetic and acid-resistant. Surface resistance 10^6 -...
Nhíp đa năng chuyên nghiệp ESD Wiha 32343
Standards IEC 61340-5-1. Tip form Straight with approx. 4 mm wide, round tip. Design Fine-tooth gripping surface, grooved gripping surface. Non-glare black coated, anti-static. Anti-magnetic and acid-resistant. Surface resistance 10^6 - 10^9 ohms. Material Special alloyed,...
Nhíp ESD 32340
Standards IEC 61340-5-1. Tip form Straight with flat, wide tip and diagonal alignment of the front gripping edge. Design Smooth gripping surfaces, gripping surfaces without grooves. Non-glare black coated, anti-static. Anti-magnetic and acid-resistant. Surface resistance 10^6 - 10^9...
Nhíp ESD 32336
Standards IEC 61340-5-1. Tip form Round curved with short, straight, 3 mm long fine tip. Design Smooth gripping surfaces, gripping surfaces without grooves. Non-glare black coated, anti-static. Anti-magnetic and acid-resistant. Surface resistance 10^6 - 10^9...
Nhíp ESD 32334
Standards IEC 61340-5-1. Tip form Straight with a needle-fine tip. Design Smooth gripping surfaces, gripping surfaces without grooves. Non-glare black coated, anti-static. Anti-magnetic and acid-resistant. Surface resistance 10^6 - 10^9 ohms. Material Special alloyed,...
Nhíp ESD 32329
Standards IEC 61340-5-1. Tip form Straight with flat, round tip, approx. 2 mm wide. Design Smooth gripping surfaces, gripping surfaces without grooves. Non-glare black coated, anti-static. Anti-magnetic and acid-resistant. Surface resistance 10^6 - 10^9 ohms. Material Special...
Nhíp ESD 32327
Standards IEC 61340-5-1. Tip form Straight with a rugged and medium-fine tip. Design Smooth gripping surfaces, gripping surfaces without grooves. Non-glare black coated, anti-static. Anti-magnetic and acid-resistant. Surface resistance 10^6 - 10^9 ohms. Material Special...
Nhíp ESD 32325
Standards IEC 61340-5-1. Tip form Straight with approx. 1 mm wide tip. Design Smooth gripping surfaces, gripping surfaces without grooves. Non-glare black coated, anti-static. Anti-magnetic and acid-resistant. Surface resistance 10^6 - 10^9 ohms. Material Special alloyed,...
Bit chuyên nghiệp Wiha 32299/32302
Material High grade chrome-vanadium steel, through hardened. Drive DIN 3126, ISO 1173, style E 6.3. Application For all types of screw applications in trade and industry. Extra Overlength bits in lengths of 50, 70, 90, 110 and 150 mm.
Tua vít Wiha 32253
Material Chrome-vanadium-molybdenum steel, matt chrome-plated Application For all hard-to-reach TORX® screws. Extra The TORX® ball end enables fastening and unfastening at an angle of up to 25°. With elongated TORX® profile behind ball end.
Bộ bit tiêu chuẩn 25mm Wiha 32071
Packaging Plastic box, reusable and dust repellent. Extra Easily identifiable content with large symbols.